Paxar Monarch PPT 2700 Bedienungsanleitung PDF herunterladen

OPERATING INSTRUCTIONS

The Monarch® RF link with Trigger 7400™ unit is a dual-purpose device.

It is a radio frequency (RF) solution for cable-less communication

between a Symbol® PPT 2700 or 2800 terminal and a Monarch® Sierra

Sport™2 9460™ printer. It also has a trigger to initiate a bar code scans

easily.

The RF link device is under control of an application running on the

terminal. Your System Administrator must load the application before you

use it.

Getting Started

To start using the RF link device:

1. Insert a charged battery into the terminal. See the terminal’s

documentation for more information. The terminal’s battery also

powers the RF link device.

2. Insert the terminal into the RF link device. See “Inserting/Removing

the Terminal,” below.

3. Load supplies in the printer. See the printer’s documentation for

more information.

4. Link the RF link device with the printer. See “Linking the RF

Modules,” below.

1 2 3 4 5 6 7 8

2 Operating Instructions 5. Run the application on the terminal. Your System Administrator will instruct you how to do this. NOTE: When using the

Seite 3

Operating Instructions 3 Linking the RF Modules Despite there being no physical connection (a cable), the RF link device and printer must still be

4 Operating Instructions When you have linked the modules, they can talk with each other up to 20 feet apart. NOTE: When you are not using the print

Operating Instructions 5 Using a Cable Connection Optional. You do not necessarily have to use the RF link device with RF communications. You can

6 Operating Instructions Troubleshooting Problems can occur with the scanner and RF communications. Scanner Problems If the scanner does not turn on,

Operating Instructions 7 RF Communication Problems If the RF link device and the printer are not communicating, try each of these suggestions to co

Seite 8

Keine Kommentare

Paxar Monarch PPT 2700 Bedienungsanleitung